Replacement remote central locking kit for the Meta M20/1 using a modified Fiat central locking relay in combination with a remote locking system. Simple plug & play kit to convert many Fiat models from the 90's-to mid 2000's, including the Punto Mk1, Fiat Bravo/Brava, Barchetta, Palio, Seicento & Multipla & more to give remote locking, will also function with Alfa Romeo, Lancia & other Fiat models which have the same relay fitted. This kit will only function with models that use the large yellow central locking relay shown in the photo, relay part numbers 51752580 or 46426365. Locking & unlocking the doors using the door key still functions as normal.
The M20 range of remote locking kits are no longer available, however we have modified the standard Fiat CDL relay using an aftermarket remote control CDL system. Simply locate & remove the relay from the Fiat vehicle, plug in the replacement relay, connect the extension cable connector to the replacement kit & away you go, no other wiring to do.
This kit comes with two 2 button fobs, CDL locking module & modified Fiat CDL relay. We will refund £10 if the old relay is sent back to us for re-use, relay must be in working order.
Boot Release Option.
Choose in the dropdown box to add the boot release option, this kit is supplied with two three buttoned fobs, when the boot release button is operated a 1 second negative pulse will be applied to the boot release wire. This can be used to remotely open the trunk/boot (boot release motor required to mechanically open the boot, a boot release solenoid can be found here ) This output can be used to operate other functions in the vehicle.
Will fit the following models:
FIAT BARCHETTA 1995-2004
FIAT BRAVA & BRAVO 1995-2001
FIAT MULTIPLA 1998-2010
FIAT PALIO 1997-2011
FIAT PANDA 2003-2012
FIAT PUNTO 1993-2000
FIAT SEICENTO 1998-2010
FIAT SIENA 2005-2011
FIAT STRADA PICKUP 1999-2011
May also fit other vehicles fitted with exactly the same locking relay, compare the CDL relay shown on this page with the relay fitted to your vehicle, (It must have exactly the same pin layout & markings for the pins)
Product Code: Meta M20/1 Kit
