Remove many Meta motorcycle alarms with the Meta bypass plug for the M357TV2, M357, M357T, M351a and Gemel E587 range of motorcycle alarms. No need to back trace & rewire the bike. Simply locate the alarm remove the cable cover, unplug the wiring loom & insert into the appropriate bypass plug & away you go. Simple plug & play bypass procedure, keeps wiring intact should an alarm be required in the future. Please choose the correct plug for the alarm fitted to the bike, if in doubt please contact the office, (Alarms marked M357a are actually the M351a model - Meta use a poor font which the '1' looks a little like a '7').
Please make sure to order the correct plug for your alarm, these bypass plugs are not cross compatible, if in doubt call the office on 0208 677 1999,or see below for more details
Alarm Fitting Time lines(Most of these alarms were fitted within the time periods shown below)
- M351a - alarms fitted between up to -1999(Also fitted with an M16 movement sensor, M16 not fitted to later model alarms)
- M357 & M357T - fitted from 1999-2002
- E587 - factory fitted to certain bikes from 1999-2014(Moto Guzzi, KTM etc)
- M357TV2 - fitted from 2003-2019
- M357TV2 - 2020 discontinued
Please make sure you choose the correct alarm kit for the connector(s) fitted to the bike. This M351a, M355, M357(T) & E587 all use the single type plug
If a replacement plug & play alarm is required click one of the following links:
Please note If this plug is being used as a fault finding device it is a custom made to order item, as such it cannot be returned for a refund should the fault be with the vehicle, each plug is fully tested before being sent out.
Supplied with instructions on how to remove the cable cover
FREE TELELPHONE TECHNICAL SUPPORT WITH EVERY ORDER (0208 677 1999)
Product Code: Meta Bypass
