Change Currency: GBP

KTM Alarm (Defcom3.1b With Optional ID Tag Technology)

£189.00

Manufacturer: Meta

Stock Level: 3

Product Information

Plug and Play Defcom3.1b alarm kit for Many KTM motorcycles making fitting a breeze (Also known as the Defcom4 sold in the EU). This alarm is the factory option on many KTM motorcycles. The kit comes with our basic fitting kit which includes a plug-in seat sensor, cable ties & Velcro mounting pads, (the KTM fitting kit available directly form KTM, not necessary unless you want originality)  Also included are two fobs have been pre-coded, alarm beeps activated & the sleep timer has been extended to 21 days (more info below)

This kit is supplied with the latest version of the Defcom alarm series, the Defcom3.1b (Not Defcom3), this unit encompasses Bluetooth technology allowing the use of a ID Tag remote fob, this allows the alarm to automatically arm & dis-arm without having to use the fob, as long as the ID Tag is within 10 metres of the alarm unit. This unit functions in exactly the same way as the earlier DefcomT & Defcom3 models when used without the ID Tag remote fob. Choose above to upgrade one of the standard fobs to the ID tag unit.

This kit includes two remote fobs pre-programmed to the alarm (including the ID'tag if chosen), the alarm is also programmed to be fully 'awake' for up to 360 hours (15 days), this means if you arm the alarm it will enter sleep mode after 15 days or if the battery falls below a set level.  The alarm will also be preprogrammed to beep when arming & disarming via the fobs. This service is included with all the Defcom3.1b's supplied by Abacus Car Alarms.

As standard & supplied by most other dealers all Defom3.1bs are preprogrammed to be awake for a maximum of 120 hours (5 Days), once 5 days have elapsed the alarm will shut down, should someone attempt to steal or move the bike the alarm will not sound. The alarm will be silent on arm/disarm.Programming the fobs must be done when powering up the alarm for the first time, if this programming period has been missed a slightly complicated proceedure will be required to code them in. The beep on arm & disarm can be programmed by the owner, however the sleep timing period can only be programmed by a dealer using special equipment.

ID Tag Option:

If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.

If choosing the ID Tag option we recomend you choose the AutoArm feature in the 'Programable Options', this will allow seamless operation of the alarm when using the Tag.

The ID tag can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, (extra charges will be incured)  

Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area

 

Optional KTM LED Adapter Loom:

This kit uses the standard KTM LED fitted in the dash, unfortunately for many models KTM have designed the circuitry in such a way that the LED blinks very dimly & cannot clearly be seen in daylight hours, not much better during the night. We now offer a LED adapter loom to which you can add an external LED, choose either the easy fit or bezel super bright LED (10mm hole will need to be drilled for the bezel type). The loom also adds the benefit of an extra alarm input (can be used for external panniers etc - make switch required) plus an extra output for a siren or pager, this wire outputs a -12V @100ma voltage when the alarm is sounding.

Type of alarm plug fitted

Type of alarm plug fitted to bike - Choose above

 

This kit will fit the following bikes: (Choose in drop down list above)

•KTM 1190 RC8/R (this kit is not supplied with the indicator resistor kit, KTM part no. 69012035050) 
•KTM 990 SM
•KTM 990 SMT 
(Not pre 2009 950cc fitted with the 18 way plug)
•KTM 990 Adventure 2009-ON
(Not pre 2009 950cc fitted with the 18 way plug)
•KTM 125/200/390 DUKE 2011-ON.  -Please check for 2021 models
•KTM 125/200/390 RC 2014-ON.
•KTM 690 DUKE 2012-ON.  
-Please check for 2021 models
•KTM 1050/1190/1290 Adventure/Adventure R 2013-ON.
•KTM 1290 Super Adventure.
•KTM 1290 Superduke R 2014-ON.

KTM 790 2017-ON

KTM 890R - KTM fitting kit required if using the seat sensor as the bracket has a space for it.

Will also fit the Husqvarna Vitpilen 701   2018-On (choose KTM 690 Duke in the option panels)

Please note we have been informed by a KTM dealer the alarm plug is no longer fitted to 2021 year 390 & 790 Dukes, there may be other 2021 models not equiped with the plug, please make sure the alarm plug is fitted to the bike before ordering the alarm kit -see below


If your bike is not listed this kit will fit all KTM motorcycles fitted with the 14 way alarm plug shown below

  KTM Alarm Plug

 

These models do not have the alarm plug fitted as such this kit will not function with:

The ATV Cross/SX,
Enduro/SX,
Mini range
Offroad rangeSuch as the  KTM690 SMC R

 

If your bike is not listed please enter the Year, Model & Engine size in the comments box on the checkout page

 

The DefCom will directly fit the Adventure 990, the Supermoto 990, the RC8 & 125 Duke. The RC8 requires the resistor pack (not supplied with this kit) for the indicators to flash, this is cheaply available from KTM part No. 69012035050.We can supply the factory fitting instructions for the RC8, 990 Adventure & 990 Supermoto, please enter which guide you require in the comments section on the checkout page.

This DefCom kit will not directly fit the plug of the Superduke 990, the Supermoto 950 & the Supermoto 690 which were designed to plug directly into the Gemel E587 alarm which is identical to the Meta M357T, both these alarms are no longer available however we can now supply the DefComT which comes with a adapter loom enabling it to directly connect to the plug fitted to these bikes, for more info click here

 

 

This kit will not fit KTM's built before 2009 fitted with the 18 Way plug, click here for the correct kit

Not compatible with the 18 way plug fitted to 2009 KTM models,click here for the correct kit

 

Complete with plug in seat sensor, plug in LED (if not already fitted by KTM) & basic fitting kit with the alarm (Velcro strips & Cable ties. LED not supplied to bikes which have the LED pre-fitted by KTM). Please note this kit does not come with a wiring loom as it uses the plug already fitted to the bike. (KTM fitting kit is available directly form KTM though not really necessary unless you want originality)      

    Seat sensor & LED supplied with the basic fitting kit (Led not supplied to bikes which have the LED pre-fitted by KTM)

    Specs:

    • Two anti-scan/antigrab, rolling code micro transmitters (self coding using the 5 digit override code)
    • Single circuit immobiliser (programmable for auto immobilisation)
    • Passive arming for full alarm system - optional, choose above (can be changed at a later date but extra costs will be involved)
    • Extremely compact design (6cmx12cmx3.5cm WxLxH)
    • Battery Backed Up Siren 
    • Visual and audible arming signals
    • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
    • Diagnostic LED
    • Internal Movement sensor (can be excluded)
    • Loud 114db remote siren
    • Sleep mode with zero battery drain after 10 days  (Can be extended  - please ask before ordering)
    • Low 1.8 am current consumption
    • Low bike battery warning when disarming
    • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
    • System test facilities in first 25 seconds of arming informs of any faults
    • Panic facility
    • Movement sensor deletion facility
    • Two additional protection circuits (Only available with the LED adapter kit)
    • Alarm automatically re-arms if triggered
    • Operating temperature -25C to 85C
    • Approved by Yamaha UK
    • Approved by KTM(international)
    • Three year no quibble warranty (1 Year if supplied to outside the UK) 
    • Telephone & Email technical support
    •  Thatcham Approval Number TMCU-236/0106 (for use as an upgrade alarm) 
    • Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required) 

     

    Please note this kit is NOT supplied with the factory KTM fitting kit which is a cost option only available from KTM (the fitting kit is also a cost option when purchacing the alarm unit from KTM which includes the seat sensor & LED).
    This Abacus kit includes the Defcom alarm unit, two fobs, seat sensor, fitting instructions & for early models only an LED (LED supplied only for early bikes not fitted with the factory immobiliser LED) and a basic fitting kit which includes; cable ties, Velcro pads & fitting screws, this kit enables the fitment to any KTM motorcycle.If you prefer to use the dedicated KTM fitting kit it can be purchased from your local KTM dealer

      Please choose the model number of the bike in the drop down boxes above or if not  listed enter the model number of the KTM in the comments section on the checkout page  - if available we will supply the fitting instructions

     

    Product Code: KTM Defcom3.1b

     

    © Copyright Abacus Car Alarms 2024

    eCommerce by CubeCart