Simple Plug & Play alarm for later Suzuki motorcycles, fitting can be done within minutes. Special version of the Meta Defcom3.1b Thatcham approved motorcycle alarm system supplied with a plug and play wiring loom for a number of late model Suzuki motorcycles. In most cases this alarm can be fitted in minutes using the supplied plug & play wiring loom. This kit will upgrade all Suzuki bikes fitted with the two alarm plugs - see photo below. Supplied with an easyfit LED or Bezel type LED (only one LED can be used) The alarm has the option of an extra trigger input for seat or pannier protection etc & an extra output for an extra siren or pager system, extra wiring will be required. For standard fitment the only extra wiring required is to connect two wires to the indicators, instructions supplied.
Last one when it's gone it's gone
Will fit the following models:
- Burgmans 125 - 650
- VStorm 650 & 1000
- Bandit 650, 1200 & 1250
- GSXR600
- Hayabusa 1300
- GSXR 600, 750 & 1000
- VZR 1800
- GSX650F K8
- Any Suzuki bike fitted with the 4 way plug (see below)
If your bike is not listed read this paragraph >
Many of the later Suzuki bikes have the two alarm plugs fitted. If in doubt inspect the battery area or behind the side panels to see if the plugs are fitted which will fit the Suzuki alarm kit (shown in the photo below), if the 4 pin plug is not fitted the standardDefcomT will need to be hard wired (bike's wiring info supplied - if available). 
Suzuki Alarm Plug & Cover
If the power lead is already used (as in the above photo) the kit comes with a spare lead which simply connects directly to the battery)
Features:
The Defcom3.1b alarm/immobiliser has been designed for motorcyclists who want maximum security at minimum cost. A well-featured, cost effective, compact design providing discreet installation and making it ideal for all scooters and motorcycle. This Thatcham Approved 2 to 1 system upgrades all MC2 immobilisers bringing all the relevant Insurance benefits of full Category 1 status. Thatcham status is only available to bikes already fitted with an approved immobiliser system otherwise this kit will be classified as a standard alarm
- Two anti-scan / antigrab, rolling code micro transmitters
- Passive arming single circuit immobiliser
- Passive arming for full alarm system (optional - not required for 2 to1)
- Hazard flash when sounding
- Battery Backed Up Siren
- Visual and audible arming signals (selectable)
- Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
- Diagnostic LED
- Internal Movement sensor (can be excluded)
- Loud 114db remote siren
- Sleep mode with zero battery drain after 5 days
- Low 1.8 mA current consumption
- Low bike battery warning when disarming
- Auto re-arm of immobilisation if ignition is not turned on within 50 seconds (Optional)
- System test facilities in first 25 seconds of arming informs of any faults
- Panic facility
- Movement sensor deletion facility
- Two additional protection circuits (seat sensor option & pannier protection - extra switches/sensors will be required)
- Alarm automatically re-arms if triggered
- Operating temperature -25C to 85C
- Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
- Optional magnetic seat sensor
- Thatcham Approval Number TMCU-271/0406 (Only when used in conjunction with a bike fitted with an approved immobiliser)
- Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required, not supplied with kits without the optional seat sensor)
- Optional equipment on KTM motorcycles
- Also Approved by Yamaha UK
- Generic fitting instructions which includes a step by step installation guide
- Three year no quibble warranty (1 Year if supplied to outside the UK)
- Telephone & Email technical support
ID Tag Option:
If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.
If choosing the ID Tag option we recomend you choose the AutoArm feature in the 'Programable Options', this will allow seamless operation of the alarm when using the Tag.
The ID tag can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, (extra charges will be incured)
Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area
Before ordering the plug & play loom please make sure the 4 way plug (see above) is fitted to you're bike, as various models produced for some markets are not fitted with them, please do not ask us as the only way to find out is to actually locate them on your own bike before ordering. A 20% handling charge will be imposed if this item is returned for this reason
Product Code: Suzuki Defcom3.1b
