Change Currency: GBP

Datatool S3 replacement


Manufacturer: Meta

Stock Level: 5

Product Information

Plug & play replacement for the Datatool S3 & Veto Plus alarm systems. Simply locate the alarm unit mounted to the bike & remove the cover (Torx T10 security screw driver required) Unplug the two connectors & insert into the plugs fitted to the Defcom3.1b adapter loom. A junior hacksaw or sharp knive will also be required to cut away some of the plastic molding from the alarm case of the S3, see the fitting instructions. Click here to see the fitting instructions (This is for the M357 fitting for the DefcomT will be very similar)

New version of the Defcom3.1b uses Bluetooth tecnology (not yet enabled for the mobile phone), if used with the optional B9.5 Bluetooth Tag (Or Fob) the alarm will automatically disarm when the Tag is nearby & the owner starts the vehicle. The new 3.1b does not use the old 16 digit coded fobs, the replacement fobs are EVO based & are self coding using a unique 5 digit code supplied with each alarm. The standard kit is supplied with two HPA EVO fobs, can be upgraded to either the B9.5 and/or EVO M252 fobs (choose above)

B9.5b ID tag, automatically dis-arms the alarm when in range

Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area


Please note the Defcom3.1b is not Thatcham 1 approved, this replacment kit is specified as a standard battery backed up alarm system which can function in the similar manor to the oriuginal S3 (Auto alarm arming is turned off)


Upgrade to the Key type fob complete with key fitting kit (Key element not supplied)

Optional Meta M252 fitted with key element (Key Element Not Supplied)

Upgrade one or both HPA type fobs to Meta M252 ignition key type remote, keyfob allows the fitment of the vehicle's metal key element, supplied with easy to follow instructions & key fitting kit, more info (Not recomended for bikes fitted with the chipped key immobiliser, key element not supplied - choose in options box below)



  • Two anti-scan / antigrab, rolling code micro transmitters
  • Passive arming single circuit immobiliser (Pre-programmed, can be switched off)
  • Passive arming for full alarm system (Optional)
  • Hazard flash when sounding
  • Battery Backed Up Siren 
  • Visual and audible arming signals (selectable)
  • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
  • Diagnostic LED
  • Internal Movement sensor (can be excluded)
  • Loud 114db remote siren
  • Sleep mode with zero battery drain after 5 days
  • Low 1.8 mA current consumption
  • Low bike battery warning when disarming
  • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
  • System test facilities in first 25 seconds of arming informs of any faults
  • Panic facility
  • Movement sensor deletion facility
  • Additional protection circuits
  • Alarm automatically re-arms if triggered
  • Upgrade to key remote
  • Operating temperature -25C to 85C
  • Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
  • Optional equipment on KTM motorcycles
  • Also Approved by Yamaha UK
  • Step by step installation guide
  • Three year no quibble warranty (1 Year if supplied to outside the UK) 
  • Telephone & Email technical support
  • Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required)

Product Code: Defcom3.1b S3


© Copyright Abacus Car Alarms 2024

eCommerce by CubeCart