Change the programming of any Defcom3.1B and or add the Keyless control with the B9.5 ID tag, choose in the option box above. This service also includes programming non functioning fobs (if not faulty) Optional Faraday bag - choose above (permanently blocks the B9.5 signal when not in use)
Change any programming options shown below (Only if the reprogram or ID Tag + Reprogram option is chosen)
(In Brackets are factory settings, in Red are settings when choosing the ID Tag)
1- Arm/Disarm Beep on/off (Off)2- Indicators Flash on Arm/Disarm, on/off (On)3- External Siren, Continuous Or Intermittent output (Continuous)4- Enable Auto-arming, enabled or disabled (Enabled) Enabled with ID Tag (Included when ID tag option is chosen)5- Auto-arming, Immobiliser Or Alarm (Immobiliser) Alarm With ID Tag (Included when ID tag option is chosen)6- Auto-arming, With Or Without Tilt/Movement (Without) Tilt With ID Tag(Included when ID tag option is chosen) 11- Enable Panic Function, on/off (Enabled) 13- Over ride Code 5 or 3 digits (5 digits) 15- Deep Sleep Mode (On) Alarm goes into standby mode after a certain period of time (In Hours) or when battery voltage goes below 12.2 Volts 16- Time Until Sleep mode occurs, in hours (120) 15 must be 'ON' 480 hours With ID Tag (Included when ID tag option is chosen) Please add any changes to programming in the comments section of the checkout box. E.G.; 1=on, 3=intermittent, 13=3 etc.. You can leave out the options you do not wish to change. Options in Red are when ID Tag is chosen, we recomend you keep the ID Tag options. If any further changes are needed in the future the cost will be in the above drop down options box.
Add the b9.5 ID Tag option for the Defcom3.1b (keyless control of the alarm, only for the Defcom3.1b)
The B9.5 ID tag will allow the alarm to function seamlessly, once the bike's ignition has been turned off & the Tag is out of range the alarm will auto arm, likewise once in range the alarm will automatically disarm, will function in conjunction with the original fobs.
Send the Decom3.1b body with all the fobs to use for reprogramming which includes:
Reprogram the alarm with one B9.5 ID Tag
Reprogram to fully auto-arm & auto-immobilise with the movement sensor
The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incured. The TXM252 or HPA Evo fobs can be added at any time using the 5 or 3 digit override code
Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area
Send the Defcom3.1b alarm unit complete with all fobs to:
Abacus Car Alarms
206 Leigham Court Rd
London
SW16 2RB
UK
This offer is for UK residents only
Product Code: Defcom3.1b Reprogram/B9.5
