This plug is for early Triumphs fitted with the Datatool S3 or Veto & Veto plus systems only. Please study the photos and compare the alarm unit with the one fitted to your bike before ordering.
Remove any Datatool S3 alarm system using the Bypass plug for the Datatool S3 & Veto Plus alarm systems. No need to back trace & rewire the wiring of these alarms Simple plug & play fitting. Simply locate the alarm remove the siren cover, (Torx T10 security screwdriver required, choose above if rquired), unplug the wiring loom & insert into the appropriate bypass plug & away you go. Simple plug & play bypass procedure, keeps wiring intact should an alarm be required in the future.
Make sure the alarm fitted to your bike is the same as shown above
Not for the Datatool System 21 as this alarm does not have an immobiliser, simply unplug the System 21 & the bike should start & run, if not the bike will be faulty
Torx T10 security screwdriver required to access the connector plugs, choose above to add tool to the order
We can also supply a plug & play replacement alarm, for more info Click Here
