Meta Defcom3.1b modified for the 2016-2019 range of Triumph motorcycles which includes the Thruxton 1200, Bonneville T120, Street Twin etc, will also fit all modern Triumphs fitted with the alarm plug made from 2002. This unit functions in conjunction with the Triumphs built in immobiliser fitted to all 2016-2020 Triumph motorcycles & uses the built in LED usually located on the speedo/tacho face. If the LED is not already pre-fitted by Triumph choose the standard DefcomT Triumph kit found here.
Will only fit Triumphs fitted with this alarm plug, from 2020 Triumph changed the type of alarm & connector
Simple Plug & Play fitting for all 2016 Triumphs fitted with the alarm plug, fitted within minutes, simply locate the alarm plug pre-fitted to the bike remove the blanking plug, plug in this kit & securely fix the alarm to the bike. Can not be any more simpler no extra wiring to be done. Supplied with easy to follow fitting instructions & mounting kit. Will not fit the later alarm connector fitted to 2020 & later Triumphs. For 2020 bikes please check type of alarm plug fitted before ordering.
There is an option to fit a seat sensor which will add about 20 minutes to the fitting time, simply mount the magnet to under the seat & the sensor to a dedicate area on the frame & plug into the socket on the adapter loom supplied with the kit. Easy to follow instruction supplied. This is only available if the seat sensor option is chosen in the drop down box below. (Please note the seat sensor cannot be added at a later date should this option not be chosen). Adding the seat sensor allows for the DefcomT to be a Thatcham 2-1 upgrade alarm (Only when fitted by an approved fitter)
If a longer cable is required for bikes such as the Rocket 3 or for Triumphs which have the alarm plug mounted under the petrol tank or you want to mount the alarm in a different area choose the extra long cable in the options box below. The standard cable is approx 55cm long the full length cable is approx 1.3 metres
- Two anti-scan / antigrab, rolling code micro transmitters
- Passive arming for full alarm system (optional)
- Hazard flash (When Sounding)
- Battery Backed Up Siren
- Visual and audible arming signals (selectable)
- Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
- Diagnostic LED
- Internal Movement sensor (can be excluded)
- Loud 114db remote siren
- Sleep mode with zero battery drain after 5 days
- Low 1.8 mA current consumption
- Low bike battery warning when disarming
- System test facilities in first 25 seconds of arming informs of any faults
- Panic facility
- Movement sensor deletion facility
- Alarm automatically re-arms if trigger
- Operating temperature -25C to 85C
- Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
- Thatcham Approval Number TMCU-236/0106 (Only for Triumphs' fitted with the chipped key immobiliser & fitted with the seat sensor)
- Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required, only when purchased with the seat sensor)
- Optional equipment on KTM motorcycles
- Also Approved by Yamaha UK
- Three year warranty (1 Year if supplied to outside the UK)
The Defcom3.1b alarm/immobiliser has been designed for motorcyclists who want maximum security at minimum cost. A well-featured, cost effective, compact design providing discreet installation and making it ideal for all scooters and motorcycle. This Thatcham Approved 2 to 1 system upgrades all MC2 immobilisers bringing all the relevant Insurance benefits of full Category 1 status.
If the bike is fitted with the alarm plug this alarm will fit
For 2020 Triumph have changed the alarm connector, this kit will not fit bikes fitted with this plug
Fitted To Tiger Sport
Tiger Sport
Thruxton 1200, Thruxton 1200R
For the Rocket III select the extra long loom, choose the standard loom for all the other Triumphs
If the add seat sensor option is not chosen it cannot be added at a later date as the two sensor options use different wiring looms
ID Tag Option:
If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.
The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incured. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code
Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area
Product Code: Triumph Defcom3.1b 2016
