HPA two button fob for use with all Meta system alarms that use two buttons (Will also function with one buttoned systems, both buttons may arm & disarm the alarm)
To program a new remote into any of the Meta alarms a 16 digit code is required. This is supplied on the plastic code card supplied with the unit. Without this code it will not be possible to program a new remote into the system. All Meta alarm systems are supplied with a red code card with the remote security number printed on it. Without this code number it will not be possible to program a new remote into your Meta alarm.
Meta Code Card with alarm code, without this code it will not be possible to program in new remotes. For car alarms a fully functioning remote is required to program a new remote into the alarm brain, for later motorcycle alarms a 5 digit code (company code) is required plus the alarm's LED must be fully functioning as the code needs to be entered using the ignition switch by counting the numbers of the code (full instructions supplied).
The code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect. e.g. 45F35BA4490A14E7 is a correct code. The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta can use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.
Click here for programming instructions
Click Here To See You-Tube video on programming Meta Fobs(opens a new window)
IMPORTANT
For car & early bike alarms a working fob is required to program a new remote into the alarm brain, later bike alarms (357 range) a five digit override code number is required - without either it will not be possible to code in a new remote fob.
When coding this fob to any of the Defcom range, Legos 3 & the M357TV2:1 a working fob is required or the alarm must automatically immobilise or arm itself, if the fob is missing or the alarm does not automatically arm it will not be possible to program in new fobs. To code to the DefcomT & Legos3 a working fob is required unless the alarm has been programmed with auto immobilisation/arming, if in doubt call the office on 0208 677 1999
Complete with instructions of how to program into your vehicle's alarm (a working fob is required for car alarms - not required for bike alarms using the 5 digit company/override code -more info)
This fob is not for the Later Defcom3.1B & EVO range of alarms, Click Here for the 16 digit coded version
Product Code: HPA TX
