Easy fit Plug & Play alarm system




Triumph 400/400x plug & play alarm system. Simple Plug & Play fitting for the Triumph Speed 400 & Scrambler 400x, fully fitted in about less than an hour.

Simply plug the unit into the connector plugs fitted to the bike, mount & plug in the siren, fit & plug in the LED and away you go. Supplied with comprehensive instructions, basic tools requires a 10mm spanner 5mm allen key & a few small flat blade screw drivers. 


More Info:  Triumph 400/400x alarm; Click here


Manufactrured by Meta Systems Italy

Two anti-scan / antigrab, rolling code transmitters (one HPA TX, one M2503 fob)

  • High quality system based on the Meta Lego 3, simple plug and play fitment
  • Passive arming single circuit immobiliser - Not included with this kit however the option is availalbe for the user to hard wire to the bike  (User Programmable option)*
  • Passive arming for full alarm system (User Programmable option)
  • Warning Hazard flash
  • Visual and audible arming signals (User Programmable option)
  • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
  • Diagnostic LED
  • Internal Movement sensor (Not a shock sensor - alarm activates if bike is moved - virtually no false alarms)
  • Loud 114db remote siren
  • Sleep mode with zero battery drain after 5 days or when the battery drops to a certain level
  • Low 1.8 mA current consumption
  • Low bike battery warning when disarming
  • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds (If fitted/programmed)
  • System test facilities in first 25 seconds of arming informs of any faults 
  • Panic facility
  • Movement sensor deletion facility (Via remotes)
  • Protection circuit one (negative trigger input) For the protection of panniers etc Trigger switches required (Not Supplied)*
  • Protection circuit two (Loop Trigger) Alarm sounds when wire is cut (Used when seat sensor option is chosen)
  • Facility to power auxiliary modules (add additional siren/tracker/pager etc)*
  • Alarm automatically re-arms if triggered
  • Operating temperature -25C to 85C