Triumph 400/400x plug & play alarm system. Simple Plug & Play fitting for the Triumph Speed 400 & Scrambler 400x, fully fitted in about less than an hour.
Simply plug the unit into the connector plugs fitted to the bike, mount & plug in the siren, fit & plug in the LED and away you go. Supplied with comprehensive instructions, basic tools requires a 10mm spanner 5mm allen key & a few small flat blade screw drivers.
Optional plug in seat sensor (choose above) available, will cause the alarm to sound if the seat is removed.
Optional extras over the standard alarm are two input triggers for accessory protection & an extra siren/pager/texter output.
- Two anti-scan / antigrab, rolling code transmitters (one HPA TX, one M2503 fob)
- Passive arming single circuit immobiliser - Not included with this kit however the option is availalbe for the user to hard wire to the bike (User Programmable option)*
- Passive arming for full alarm system (User Programmable option)
- Warning Hazard flash
- Visual and audible arming signals (User Programmable option)
- Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
- Diagnostic LED
- Internal Movement sensor (Not a shock sensor - alarm activates if bike is moved - virtually no false alarms)
- Loud 114db remote siren
- Sleep mode with zero battery drain after 5 days or when the battery drops to a certain level
- Low 1.8 mA current consumption
- Low bike battery warning when disarming
- Auto re-arm of immobilisation if ignition is not turned on within 50 seconds (If fitted/programmed)
- System test facilities in first 25 seconds of arming informs of any faults
- Panic facility
- Movement sensor deletion facility (Via remotes)
- Protection circuit one (negative trigger input) For the protection of panniers etc Trigger switches required (Not Supplied)*
- Protection circuit two (Loop Trigger) Alarm sounds when wire is cut (Used when seat sensor option is chosen)
- Facility to power auxiliary modules (add additional siren/tracker/pager etc)*
- Alarm automatically re-arms if triggered
- Operating temperature -25C to 85C
Items Marked *Are not covered by tecnical support
Product Code: Legos-TR400
