Plug and Play Defcom3.1b alarm kit for the Gemel E587 alarm system. Simple plug & play fitment or swap over making fitting a breeze. Simply unplug the old E587 & plug in this unit & away you go.
This kit is supplied with the latest version of the Defcom alarm series, the Defcom3.1b (Not Defcom3), this unit encompasses Bluetooth technology allowing the use of a ID Tag remote fob, this allows the alarm to automatically arm & dis-arm without having to use the fob, as long as the ID Tag is within 10 metres of the alarm unit. This unit functions in exactly the same way as the earlier DefcomT & Defcom3 models when used without the ID Tag remote fob. Choose above to upgrade one of the standard fobs to the ID tag unit.
ID Tag Option:
If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.
Plug and Play DefcomT alarm kit for early KTM motorcycles making fitting a breeze, based on the new Defcom3.1b. This alarm is a Factory option on many KTM motorcycles. The kit comes with a special wiring adapter allowing the Defcomt to be pluged directly to the 18 way Gemel alarm connector fitted to the bike, also included is a plug-in seat sensor with cable ties & velco mounting pads (optional KTM fitting kit not required or can be purchased directly from KTM)
The ID tag & any programmable options can only be added when ordering a new Defcom3.1b, if required at a later date the alarm unit complete with all fobs will need to be returned to us for re-programming, extra charges will be incured. The TXM252 or HPA Evo fobs can be added at any time using the 5 digit override code
Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area
Please note the Defcom3.1b is not Thatcham 1 approved, this replacment kit is specified as a standard battery backed up alarm system which can function in the similar manor to the oriuginal S3 (Auto alarm arming is turned off)
Optional Meta M252 fitted with key element (Key Element Not Supplied)
Upgrade one or both HPA type fobs to Meta M252 ignition key type remote, keyfob allows the fitment of the vehicle's metal key element, supplied with easy to follow instructions & key fitting kit, more info (Not recomended for bikes fitted with the chipped key immobiliser, key element not supplied - choose in options box below)
- Two anti-scan / antigrab, rolling code micro transmitters
- Passive arming single circuit immobiliser (Pre-programmed, can be switched off)
- Passive arming for full alarm system (Optional)
- Hazard flash when sounding
- Battery Backed Up Siren
- Visual and audible arming signals (selectable)
- Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
- Diagnostic LED
- Internal Movement sensor (can be excluded)
- Loud 114db remote siren
- Sleep mode with zero battery drain after 5 days
- Low 1.8 mA current consumption
- Low bike battery warning when disarming
- Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
- System test facilities in first 25 seconds of arming informs of any faults
- Panic facility
- Movement sensor deletion facility
- Additional protection circuits
- Alarm automatically re-arms if triggered
- Upgrade to key remote
- Operating temperature -25C to 85C
- Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
- Optional equipment on KTM motorcycles
- Also Approved by Yamaha UK
- Step by step installation guide
- Three year no quibble warranty (1 Year if supplied to outside the UK)
- Telephone & Email technical support
- Optional Thatcham approved certificate (UK only, please leave a note in the checkout box on the checkout page if a certificate is required)
