£99.00

Meta pre-coded circuit board for the M300 case as suppplied by Lotus & TVR vehicles, will also fit the Ferrari F430 fob case.  This sale is for the circuit board only which will fit the M300 case & the Ferrari Keyfob as shown below (neither cases are supplied). Sale is for one circuit board

Information about 16 digit coded fobs - Please note a working fob is required to code this new fob into the alarm control unit. For the M357 range of motorcycle alarms the override code (company code) is required. For more information about all Meta remote fobs click here, if the code is not available please contact the office as the alarm ECU could be re-programmed with a new code and replacement fobs (later models only) - more info. If in any doubt please contact the office. 

Meta Code Card showing alarm code & positions

The 16 digit code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect (known as a hexadecimal number). The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.

  Complete with programming instructions

Please add the 16 digit code number in the comments section on the checkout page

Product Code: METIEZVW68