Re-program a Meta M99T2 Alarm system with two new fobs & new codecard.
Send in your old alarm for re-programming, this service includes two HPA type fobs (upgrade to the original round single button TXM550 round round fobs - choose in the options box above), a codecard and user instructions. Simply locate the alarm usually hidden somewhere under the dash of the vehicle, unplug and send it to us for re-coding. The re-coded alarm will be sent back via Royal Mail Next Day Special Delivery, in most cases we offer a 48 hour turn around (providing we receive the alarm via a next day delivery service, excluding w/ends)
Send the M99t2 alarm control box to:
Abacus Car Alarms,
206 Leigham Court Road,
London,
SW16 2RB
If your vehicle also has the Meta M36T immobiliser fitted please contact the office before ordering.
Locating the Alarm ECU on factory fitted systems:
Alfa Romeo GTV: On the drivers side locate and remove a small screw in the carpet cover of the centre console, remove the cover, and you should see the M99 alarm brain located somewhere under the stereo unit, pull out the alarm (sometimes it may be easier to do this from the passenger side - same method of removing the carpet cover) remove the plugs and send it to me at the address below. Without the alarm the car will still start and run as normal. Once reprogrammed simply plug the alarm in which will start working immediately. More Info
Fiat Coupe: The alarm is located behind the fuse box located in the drivers footwell. Pull the fusebox down as far as it will go (it is mounted on stiff hinges - for more info see owners manual), using a torch locate the alarm which is simply pushed up where all the fusebox wires disappear, gently pull it down and unplug the unit and send it to me at the address below. More Info
VX220 & Lotus Ellise: The alarm is located on the passenger (near side) under the top dash cover, More info.
