Replacement circuit board for the Maserati 4200GT two buttoned fob, limited stock when they are gone they are gone
To program a new remote into any of the Meta alarms a 16 digit code is required. This is supplied on the plastic code card supplied with the unit. Without this code it will not be possible to program a new remote into the system. All Meta alarm systems are supplied with a red code card with the remote security number printed on it. Without this code number it will not be possible to program a new remote into your Meta alarm.
Meta Code Card with alarm code, without this code it will not be possible to program in new remotes. For car alarms a fully functioning remote is required to program a new remote into the alarm brain, for later motorcycle alarms a 5 digit code (company code) is required plus the alarm's LED must be fully functioning as the code needs to be entered using the ignition switch by counting the numbers of the code (full instructions supplied).
The code is made up of numbers & letters which can only be: A,B,C,D,E & F, any other letters are not allowed and the code will be incorrect. e.g. 45F35BA4490A14E7 is a correct code. The 1 to 7 numbers refer to the available positions allowed for the remotes to be programmed, which means the alarm can be programmed with up to 7 remotes. Be care full when reading the code, Meta can use a very poor font which makes it difficult to distinguish between the letter B and the number 8 and the letter D and the number 0. If in doubt try scanning the card at a high resolution and enlarging the image using your regular paint program.
Click here for programming instructions
Please add the 16 digit code number to the comments box at checkout.
Complete with programming instructions
Product Code: M826ct
