Plug and Play Defcom3.1b alarm kit for the early rangege of KTM motorcycles originally fitted or wired for the Gemel E587 alarm system. Simple plug & play fitment or swap over making fitting a breeze. This alarm is the factory option on many KTM motorcycles. The kit comes with our basic fitting kit which includes a plug-in seat sensor, cable ties & Velcro mounting pads, (the KTM fitting kit available directly form KTM, not necessary unless you want originality)
This kit is supplied with the latest version of the Defcom alarm series, the Defcom3.1b (Not Defcom3), this unit encompasses Bluetooth technology allowing the use of a ID Tag remote fob, this allows the alarm to automatically arm & dis-arm without having to use the fob, as long as the ID Tag is within 10 metres of the alarm unit. This unit functions in exactly the same way as the earlier DefcomT & Defcom3 models when used without the ID Tag remote fob. Choose above to upgrade one of the standard fobs to the ID tag unit.
ID Tag Option:
If choosing the ID Tag the 'Auto Arm' option above can also be added & will function seamlessly with the ID Tag (Auto-Arm option can also be added if using the standard fobs, but the alarm will need to disarmed every time you want to move or use the bike - can be put into service mode so the alarm will not interfere when servicing the vehicle), the alarm will automatically disarm when the Tag is within 10 metres of the alarm unit. Please note if the alarm is armed by pressing either the standard fob or ID tag button it will also need to be disarmed using the button, it will not automatically disarm even when using the ID Tag. When using the Tag button there is usually a 3 secound delay, this is normal, when using the Tag normally there will be no such delay, there is no delay when using the standard fobs.
Plug and Play DefcomT alarm kit for early KTM motorcycles making fitting a breeze, based on the new Defcom3.1b. This alarm is a Factory option on many KTM motorcycles. The kit comes with a special wiring adapter allowing the Defcomt to be pluged directly to the 18 way Gemel alarm connector fitted to the bike, also included is a plug-in seat sensor with cable ties & velco mounting pads (optional KTM fitting kit not required or can be purchased directly from KTM)
Free Faraday pouch when the B9.5 ID Tag is ordered, stops communication with the alarm should the tag be in a nearby area
This kit si for KTM models fitted with the Gemel E587 alarm plug only, for bikes fitted with the DefcomT plug Click Here
Will fit 2005 990 SuperdukeR and any other KTM model fitted with the above plug
Upgrade to the M252 key type remote fobs (supplied with a key fitting kit - not supplied with the key element)
choose in options box above
Specs:
- Two anti-scan/antigrab, rolling code micro transmitters
- Single circuit immobiliser (programmable for auto immobilisation)
- Passive arming for full alarm system (optional)
- Extremely compact design (6cmx12cmx3.5cm WxLxH)
- Hazard flash
- Battery Backed Up Siren
- Visual and audible arming signals (selectable)
- Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
- Diagnostic LED
- Internal Movement sensor (can be excluded)
- Loud 114db remote siren
- Sleep mode with zero battery drain after 5 days
- Low 1.8 am current consumption
- Low bike battery warning when disarming
- Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
- System test facilities in first 25 seconds of arming informs of any faults
- Panic facility
- Movement sensor deletion facility
- Two additional protection circuits
- Facility to power auxiliary modules (optional siren or pager system - choose below)
- Alarm automatically re-arms if triggered
- Operating temperature -25C to 85C
- Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)
- Also Approved by Yamaha UK
- Optional equipment on KTM motorcycles
- Three year no quibble warranty (1 Year if supplied to outside the UK)
- Telephone & Email technical support
- Thatcham Approval Number TMCU-236/0106 (for use as an upgrade alarm)
Please note this kit is NOT supplied with the factory KTM fitting kit which a cost option only available from KTM (the fitting kit is also a cost option when purchacing the alarm unit from KTM). The kit we supply comes with some cable ties & Velcro pads etc so it can be fitted to any KTM motorcycle.If you prefer to use the dedicated KTM fitting kit it can be purchased from your local KTM dealer
Please enter the year & model number of the KTM in the comments section on the checkout page - if available we will supply the fitting instructions
Product Code: KTM E587 Kit
