Change Currency: GBP

KTM DefcomT Plug & Play Alarm (Original)

£150.00

Manufacturer: Meta

Stock Level: 9

Product Information

Plug and Play DefcomT alarm kit for Many KTM motorcycles making fitting a breeze. This alarm is a Factory option on many KTM motorcycles. The kit comes with the plug-in seat sensor cable ties & velcro mounting pads (KTM fitting kit available directly form KTM though not really necessary unless you want originality)

 

Optional KTM LED Adapter Loom:

This kit uses the standard KTM LED fitted in the dash, unfortunately for many models KTM have designed the circuitry in such a way that the LED blinks very dimly & cannot clearly be seen in daylight hours, not much better during the night. We now offer a LED adapter loom to which you can add an external LED, choose either the easy fit or bezel super bright LED (10mm hole will need to be drilled for the bezel type). The loom also adds the benefit of an extra alarm input (can be used for external panniers etc - make switch required) plus an extra output for a siren or pager, this wire outputs a -12V @100ma voltage when the alarm is sounding.

 


 

This kit will fit the following bikes: (Choose in drop down list above)

•KTM 1190 RC8/R (this kit is not supplied with the indicator resistor kit, KTM part no. 69012035050) 
•KTM 990 SM
•KTM 990 SMT 
(Not pre 2009 950cc fitted with the 18 way plug)
•KTM 990 Adventure 2009-ON
(Not pre 2009 950cc fitted with the 18 way plug)
•KTM 125/200/390 DUKE 2011-ON.  -Please check for 2021 models
•KTM 125/200/390 RC 2014-ON.
•KTM 690 DUKE 2012-ON.  
-Please check for 2021 models
•KTM 1050/1190/1290 Adventure/Adventure R 2013-ON.
•KTM 1290 Super Adventure.
•KTM 1290 Superduke R 2014-ON.

KTM 790 2017-ON

Will also fit the Husqvarna Vitpilen 701   2018-On (choose KTM 690 Duke in the option panels)

Please note we have been informed by a KTM dealer the alarm plug is no longer fitted to 2021 year 390 & 790 Dukes, there may be other 2021 models not equiped with the plug, please make sure the alarm plug is fitted to the bike before ordering the alarm kit -see below


If your bike is not listed this kit will fit all KTM motorcycles fitted with the 14 way alarm plug shown below

 

These models do not have the alarm plug fitted as such this kit will not function with:

The ATV Cross/SX,
Enduro/SX,
Mini range
Offroad rangeSuch as the  KTM690 SMC R

 

If your bike is not listed please enter the Year, Model & Engine size in the comments box on the checkout page

 

The DefComT will directly fit the Adventure 990, the Supermoto 990, the RC8 & 125 Duke. The RC8 requires the resistor pack (not supplied with this kit) for the indicators to flash, this is cheaply available from KTM part No. 69012035050.We can supply the factory fitting instructions for the RC8, 990 Adventure & 990 Supermoto, please enter which guide you require in the comments section on the checkout page.

This DefComT kit will not directly fit the plug of the Superduke 990, the Supermoto 950 & the Supermoto 690 which were designed to plug directly into the Gemel E587 alarm which is identical to the Meta M357T, both these alarms are no longer available however we can now supply the DefComT which comes with a adapter loom enabling it to directly connect to the plug fitted to these bikes, for more info click here

 

 

This kit will not fit KTM's built before 2009 fitted with the 18 Way plug, click here for the correct kit

Not compatible with the 18 way plug fitted to 2009 KTM models,click here for the correct kit

 

Complete with plug in seat sensor, plug in LED (if not already fitted by KTM) & basic fitting kit with the alarm (Velcro strips & Cable ties. LED not supplied to bikes which have the LED pre-fitted by KTM). Please note this kit does not come with a wiring loom as it uses the plug already fitted to the bike. (KTM fitting kit is available directly form KTM though not really necessary unless you want originality)      

    Seat sensor & LED supplied with the basic fitting kit (Led not supplied to bikes which have the LED pre-fitted by KTM)

     

    Upgrade the DefcomT to the Defcom3.1b, which comes with one ID tag remote fob, allows automatic disarm of the alarm when nearby, choose above

     

    ID tag used on the Defcom3.1b which gives auto disarm of alam when nearby

     

    Specs:

    • Two anti-scan/antigrab, rolling code micro transmitters
    • Single circuit immobiliser (programmable for auto immobilisation)
    • Passive arming for full alarm system (optional)
    • Extremely compact design (6cmx12cmx3.5cm WxLxH)
    • Hazard flash
    • Battery Backed Up Siren 
    • Visual and audible arming signals (selectable)
    • Secure override facility activated by the owners individual PIN code in the event of loss or damage to transmitters
    • Diagnostic LED
    • Internal Movement sensor (can be excluded)
    • Loud 114db remote siren
    • Sleep mode with zero battery drain after 5 days
    • Low 1.8 am current consumption
    • Low bike battery warning when disarming
    • Auto re-arm of immobilisation if ignition is not turned on within 50 seconds
    • System test facilities in first 25 seconds of arming informs of any faults
    • Panic facility
    • Movement sensor deletion facility
    • Two additional protection circuits
    • Facility to power auxiliary modules (optional siren or pager system - choose below)
    • Alarm automatically re-arms if triggered
    • Operating temperature -25C to 85C
    • Ultra Small - Maximum Dimensions 9.5cm X 6cm X 3.5cm (LxWxH - Plug not connected)   
    • Also Approved by Yamaha UK
    • Optional equipment on KTM motorcycles
    • Three year no quibble warranty (1 Year if supplied to outside the UK) 
    • Telephone & Email technical support
    •  Thatcham Approval Number TMCU-236/0106 (for use as an upgrade alarm)  

     

    Please note this kit is NOT supplied with the factory KTM fitting kit which a cost option only available from KTM (the fitting kit is also a cost option when purchacing the alarm unit from KTM).
    This Abacus kit includes the Defcom alarm unit, two fobs, seat sensor, fitting instructions & for early models only an LED (LED supplied only for early bikes not fitted with the factory immobiliser LED) and a basic fitting kit which includes; cable ties, Velcro pads & fitting screws, this kit enables the fitment to any KTM motorcycle.If you prefer to use the dedicated KTM fitting kit it can be purchased from your local KTM dealer

     Please choose the model number of the bike in the drop down boxes above or if not  listed enter the model number of the KTM in the comments section on the checkout page  - if available we will supply the fitting instructions

     

    Product Code: KTM DefcomT

     

    © Copyright Abacus Car Alarms 2021

    eCommerce by CubeCart